GK-CB High-Pressure Self-Priming Pump

GK-CB high-pressure self-priming pump is a small water supply system, which is suitable for domestic water intake, well water lifting, pipeline pressurization, garden watering, vegetable greenhouse watering and breeding industry. It is also suitable for water supply in rural areas, aquaculture, gardens, hotels, canteens and high-rise buildings.

Products Details

MODEL Power (W) Voltage (V/HZ) Current (A) Max.flow (L/min) Max.head (m) Rated flow (L/min) Rated head (m) Suction head (m) Pipe size (mm)
GK-CB200A 200 220/50 2 33 25 17 12 8 25
GK-CB300A 300 220/50 2.5 33 30 17 13.5 8 25
GK-CB400A 400 220/50 2.7 33 35 17 15 8 25
GK-CB600A 600 220/50 4.2 50 40 25 22 8 25
GK-CB800A 800 220/50 5.2 50 45 25 28 8 25
GK-CB series of pumps have automatic function, that is, when the tap is turned on, the pump will start automatically; when the tap is turned off, the pump will stop automatically. If it is used with the water tower, the upper limit switch can automatically work or stop with the water level in the water tower. This series is with cover and base, so it could protect the pump from strong sunshine and rain.

Low Noise

GK-CB series features: 1. Double Intelligent Control When the pressure control system enters into the protection, the pump will automatically switches to the flow control system to ensure the normal water supply. 2. Micro-computer Control The water flow sensor and pressure switch are controlled by PC microcomputer chip to make the pump start-up while using water and to make it shut-down while not using water. The other protective functions are also controlled by micro-computer. 3. Water shortage protection When the water pump inlet is short of water, the water pump automatically enters into the water shortage protection system in case the pump still works. 4. Overheating protection The coil of water pump is equipped with overheat protector, which can effectively prevent the motor from being damaged by excessive current or some matters jamming the impeller. 5. Anti-rust protection When the water pump is not used for a long time, it is forced to start for 10 seconds every 72 hours to prevent rust or scale jamming. 6. Delay start When the water pump is inserted into the socket, it is delayed to start for 3 seconds, so as to avoid power on immediately and spark in the socket, so as to protect the stability of electronic components. 7. No frequent startup The use of electronic pressure switch can avoid frequent start-up when the water output is very small, so as to keep the constant pressure and to avoid the water flow suddenly large or small.

Suitable for outside use

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours